6. Assembly Bends

Salling Plast produces several types of assembly bends; as an oversize jacket pipe, a jacket pipe just as the can be shrinkable.

All bends are produced using traditional PeHD-material so as that the characteristics of the bends match those of the jacket pipe.

Our standard program covers dimensions from Ø63 up to Ø710 mm.

Angles of 45° and 90° together with end lengths of 500 x 500 mm and 1000 x 1000 mm are shown in measurement tables.

Bends with different angles, lengths, radii and number of segments can be supplied by way of special request.

6.1. Assembly Bends, Oversize Jacket Pipe

Bends produced from oversize jacket pipe are used on existing pipelines. The bend overlaps the jacket pipe and can be sealed with a shrinkable sleeve or other appropriate sealing materials that can be mounted before/after foaming.

6.2. Assembly Bends, Jacket Pipe

Bends produced from jacket pipes are used on existing pipe lines where a smooth/ even joining is required between bend and existing pipe.

 

Pipe ends are extrusion welded.

6.3. Assembly Bends, Shrinkable

Shrinkable bends are used on existing pipe lines.

Shrinkable sleeves and adhesive can be supplied to create a double sealing.

Fitted adhesive is not recommended as this can cause problems with the slitting and the welding process later on.

Flexbøjninger

 

Flexbøjninger fra Salling Plast AS er fremstilles af bestrålet PEHD. 

Materialet kan bukkes op til 90 grader. Forefindes til kapperørsdimensioner fra ø90 t.o.m. ø200.

 

Flexbøjninger er brugervenlige og nemme at arbejde med, selv i de større dimensioner.

 

Kan leveres som kit med alt tilbehør for komplet montage eller separat, hvor kunden selv står for diverse tilbehørsdele. Har krympbare ender med mastik.

 

Dobbelttætning opnås med manchetter.Skumhuller lukkes med ekspansionspropper.

 

Flexbøjninger leveres i hvid folie.